Simulation Nation

Validating CFD Simulation – Part 1

Posted by Mark Decker on Jul 13, 2017 1:21:00 PM

Note: This is Part 1 of a continuing series to give the subject of CFD validation comprehensive coverage.  Please subscribe to the blog or check back on a regular basis for subsequent installments.

Read More

Topics: CFD

Top 4 Reasons for Simulation Services

Posted by Mark Decker on Jul 12, 2017 9:30:00 AM

 Simulation services is a strategic investment. The return on that investment may vary from saving time and money to increasing competiveness.  Here are four reasons why companies chose to collaborate on their engineering projects with Sim Specialists, a division of Hagerman & Company.

Read More

Topics: Simulation, CFD, FEA

The Future of Engineering Innovation Lies in Simulation

Posted by hagermancompany on Jun 2, 2017 10:24:00 AM

Failure is an integral part of engineering innovation and success, and through simulation, we can innovate without the setbacks of traditional failure models. This isn’t to say that as engineers we will never fail now that simulation has become such a vital tool we can utilize, rather our failure becomes a little more digital and a lot less physical.

Read More

Topics: Simulation, Autodesk Simulation CFD

Where We Stand in the World of Simulations

Posted by SimulationNation on May 30, 2017 11:22:28 AM

Whether it be finite element analysis or computational fluid dynamics, simulation technologies are crucial to designing to the highest degree. Our capabilities have come quite a long way in even just the last decade. The exponential rise of computers and the shrinking of transistors has meant that more complex simulations are becoming possible day by day. Simulation even now extends beyond just testing your design, programs are now capable of generatively designing a part based on constraints – a direct result of precise simulation.

Read More

Topics: Simulation, Autodesk Simulation CFD

Building Simulation: Analyzing Performance Without Breaking Ground… or a Sweat

Posted by hagermancompany on Apr 12, 2017 3:56:50 PM

Today’s architects and engineers can now analyze building performance early in the design stage thanks to 3D building performance simulation and finite element analysis.

Simulation tools allow them to effectively predict building energy performance, sustainability, and green features such as daylighting, as well as performance attributes such as airflow for heating and cooling needs, including computational fluid dynamics for buildings (such as data centers that require constant cooling). Thanks to the complexity of today’s building projects, simulation is becoming de rigueur for government clients and even private owners whose buildings must perform as advertised. AEC firms are being required to provide simulation proof that the design will work and that the energy consumption meets certain requirements.

Read More

Topics: CFD, Building Simulation

The More You Know: Debunking the 5 Most Common Myths About Simulation

Posted by Joy Voltenburg on Apr 10, 2017 8:05:00 AM
With simulation software, engineers can analyze stresses on product designs without having to do any physical testing. Wow, that sounds like such a time-saver, you might be thinking. (It is!) Or you might be thinking that simulation sounds like it could save you money. (It can!)

So why do so many engineers choose not to use simulation when designing products? It has long been thought to be too expensive, too difficult to use, or that products are too mature for redesign. (Nothing is too old to be redesigned.) It’s also sometimes seen as a tool that is used only for predicting failure—but it can be so much more. It’s time to dispel these myths.

Read More

Topics: Industry News

Four Ways Every Engineer Should Use Simulation

Posted by hagermancompany on Apr 5, 2017 3:38:10 PM

Early product design decisions by engineers are often done in a vacuum of information. Starting with an initial concept and testing as you go is a great way to collect data about what’s working and what isn’t that will ultimately get you to a better outcome. Learn four ways every engineer should use simulation during design to test ideas and make informed decisions.You don’t have to wait until the final stages of the design process to perform simulations. Here are four types of simulations all engineers can use to inform designs from the earliest stages until a physical product is created.

Read More

Topics: ebook

Sim Specialists Assists Mater Academy in F1 Challenge

Posted by Mark Decker on Apr 28, 2016 9:13:25 AM

We recently had the pleasure of assisting the Paladin F1 team at Mater Academy in Florida with their racing entry in the F1 In Schools challenge.

Read More

Topics: CFD

Supporting Simulation with Physical Testing

Posted by Mark Decker on Nov 3, 2015 7:53:00 AM

As consultants who specialize in simulation, we continue to expand our physical testing capabilities.  For example, the image below depicts the results from both testing and CFD on a Raspberry Pi unit, which are very compact Linux machines we use for data acquisition and other tasks.

Read More

Topics: CFD

Mexico Trip Inspires CFD on 'El Castillo'

Posted by Mark Decker on Sep 1, 2015 3:01:00 PM

Sim Specialists recently traveled to Mexico City to deliver onsite FEA and CFD simulation services.  The trip reminded me of a documentary I watched a few months ago about El Castillo, a Mayan structure located in the Yucatan peninsula region of Mexico.

Read More

Topics: CFD